Komatsu — PARKING MACHINE

OPERATION OPERATION PARKING MACHINE 0. Avoid stopping suddenly. Give yourself ample room when stopping. Do not park the machine on slopes. If the machine has to be parked on a slope, set it fac- ing directly down the slope, then dig the bucket into the ground and put blocks under the tires to prevent the machine from moving. If the control lever is touched by accident, the work equipment or the machine may move suddenly, and this may lead to a serious accident. Before leaving the operator‘s compartment, always set the safety lock lever securely to the LOCK position.

Even if the parking brake switch is turned ON, there is danger until the parking brake pilot lamp lights up, so keep the brake pedal depressed. NOTICE Never use the parking brake switch to brake the machine when traveling except in an emergency. Apply the parking brake only after the machine has stopped. 1. Release accelerator pedal (1), then depress brake pedal (2) to stop the machine. 2. Place directional lever (3) in N (neutral) position. 3-111 WARNING