Komatsu — PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS

PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS MAINTENANCE PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS 0. To ensure safety at all times when operating or driving the machine, the user of the machine must always carry out periodic maintenance. In addition, to further improve safety, the parts in the safety-critical parts list must also be replaced at the specified interval. These parts are particularly closely connected to safety and fire prevention, so please contact your Komatsu distributor to have them replaced. With these parts, the material changes as time passes, or they easily wear out or deteriorate.

However, it is difficult to judge the condition of the parts simply by periodic maintenance, so they should always be replaced after a fixed time has passed, regardless of their condition. This is necessary to ensure that they always maintain their function completely. However, if these parts show any abnormality before the replacement interval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same time as the hoses. In addition, carry out the checks for the hydraulic hoses other than periodic replacement parts. If any abnormality is found, tighten the clamps or replace the parts.

When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. 4-14 No.

Safety critical parts for periodic replacement Q’ty Replacement interval 1 Fuel hose (fuel tank - fuel strainer) 1 Every 2 years or every 4000 hours, whichever comes first 2 Fuel hose (fuel strainer - supply pump) 1 3 Fuel return hose (supply pump - fuel tank) 1 4 Fuel hose (supply pump - fuel filter) 1 5 Fuel hose (fuel filter - supply pump) 1 6 Fuel spill hose (unit injectior - fuel tank) 1 7 Steering hose (pump - steering valve) 1 8 Steering hose (steering valve - steering cylinder) 4 9 Steering hose (steering valve - hydraulic tank) 2 10 Brake hose (pump - accumulator charge valve) 2 11 Brake hose (accumulator charge valve - check valve)) 1 12 Brake hose (check valve - tandem valve) 2 13 Brake hose (check valve - single valve) 1 14 Brake hose (check valve - accumulator P.P port) 1 15 Brake hose (tandem valve - front brake) 2 16 Brake hose (tandem valve - rear brake) 2 17 Brake hose (single valve - tandem valve) 1 18 Brake hose (tandem valve - drain block) 1 19 Brake hose (single valve - drain block) 1 20 Brake hose (drain block - hydraulic tank) 1 21 Brake hose (brake accumulator - reduction valve for emergency parking brake cancel) 1 22 Brake hose (transmission valve - reduction valve for emergency parking brake cancel) 1 23 Brake hose (charge valve drain - hydraulic tank) 1