HANDLING LOAD METER ATTACHMENTS, OPTIONS METHOD OF CALIBRATION (ADJUSTING 0 POINT) For details of the method of carrying out calibration, see “CARRYING OUT CALIBRATION (ADJUSTING 0 POINT) WHEN EMPTY ( 6-15 )“ and “CARRYING OUT CALIBRATION (ADJUSTING 0 POINT) WHEN LOADED ( 6-17 )“. REMARK Normally, it is sufficient to carry out calibration only when empty, but it is also possible to carry out cali- bration when loaded if necessary. DELETING LOAD METER DISPLAY It is possible to set so that there is no load meter display. If there is no display, only the speed is displayed. To switch the load meter between display and no display, see “STOPPING CALCULATION ( 6-14 )“.
SPEED DISPLAY The travel speed of the machine is displayed on load meter display (1). It is also possible to switch this display (1) so that it displays the engine speed. If you wish to switch the speed display to the engine speed dis- play, please ask your Komatsu distributor to carry out the oper- ation. 6-6