JOYSTICK STEERING SYSTEM ATTACHMENTS, OPTIONS 3. Operate the joystick lever in direction (b) to turn the machine to the right; operate it in direction (a) to turn the machine to the left. The greater the angle of operation, the faster the articulating speed becomes. 4. It is possible to switch the articulating speed with the HI/ LOW selector switch. Select the speed to match the operation. 5. When the machine has articulated to the desired angle, return the joystick lever to the N position. The joystick lever will return automatically to the N position. 6.
To return the direction of travel of the machine so that it trav- els in a straight line, operate the joystick lever in the oppo- site direction from the N position (for example, when the machine is articulated to the right, operate the joystick lever to the left). 7. Use the FNR switch at the top of the joystick lever to set the transmission to the direction of travel. N position: Neutral F position: FORWARD R position: REVERSE REMARK If the position of the directional lever and the FNR switch are different, the joystick pilot lamp flashes, the warning lamp lights up, and the alarm buzzer sounds. At the same time, “E00 SHIFT LEVER NEUTRAL“ is dis- played on the character display.
In this condition, the machine will travel in the direction set by the directional lever, so set the directional lever to N. 6-58