PRECAUTIONS FOR MAINTENANCE SAFETY MAINTENANCE WITH ENGINE RUNNING 0. Stop the machine on firm, level ground. Select a place where there is no hazard of falling rocks or landslides, or of flooding if the land is low. Lower the work equipment completely to the ground and stop the engine. After shut-down of the engine, push the right hydraulic lever (1) or the multifunction lever (5) 2 to 3 times to its stop to the LIFT and LOWER position, in order to reduce the pressure in the hydraulic circuit. Then push the safety lever (2) to the LOCK position. 5 1 Turn parking brake switch (3) to the ON position and apply the parking brake, then put blocks under the front and rear of the tires.
Lock the front and rear frames with safety bar (4). 2-26