Komatsu — MACHINE MONITOR

OPERATION EXPLANATION OF COMPONENTS EXPLANATION OF COMPONENTS 0. The following is an explanation of the devices needed for operating the machine. To carry out suitable operations correctly and safely, it is important to understand fully the methods of operating the equipment and the meanings of the displays. MACHINE MONITOR 0. A: Character display E: Pilot display B: Emergency stop items F: Meter display C: CAUTION items G: Central warning lamp D: Inspection and maintenance items NOTICE When turning the starting switch to the ON position before starting the engine, the central warning lamp, caution lamps, and pilot lamps light up for 2 seconds to check the sys- tem.

After the alarm buzzer sounds for 2 seconds, it goes off if the condition is normal. The shift indicator display shows “88“ for 2 seconds. The indicator gauges and meters are actuated after the above system check is completed. The character display shows “KOMATSU SYSTEM CHECK“ for 3 seconds. If the lamps do not light up, there is probably a failure or disconnection, so contact your Komatsu dis- tributor for inspection. 3-7