Komatsu — CHARACTER DISPLAY PORTION

EXPLANATION OF COMPONENTS OPERATION FAILURE CODE DISPLAY 0. If an action code is displayed on the character display, check the failure code according to the failure code display method given below. When contacting your Komatsu distributor to request repairs, please inform your distributor of the failure code. Method of displaying failure code 1. If an action code is displayed on the character display of display portion (4), press the top (>) of monitor panel mode selector switch 2 (1). The action code will change to the failure code. The failure code is displayed with the first 6 digits on the left of the top line of the character display.

The code displayed after the space on the right side of the failure code indicates the controller that detected the failure code. The component causing the failure is displayed on the bottom line of the character display. 2. Press the top (>) of monitor panel mode selector switch 2 (1) again. If the condition is normal, the service meter is displayed for several seconds, then the display returns to the action code. If more than one failure has occurred at the same time, the next failure code is displayed. 3-12 Top right code Controller detecting failure code MON Machine monitor TM Transmission controller ENG ENG Engine controller Work equipment controller (option)