EXPLANATION OF COMPONENTS OPERATION COOLING FAN REVERSE ROTATION PILOT LAMP 0. This monitor (2) lights up when the direction of rotation of the cooling fan is reversed. At the same time, “COOLING FAN REVERSE“ is displayed on the character display. REMARK When the engine is running, even if the cooling fan reverse switch is operated, the fan does not rotate in reverse. In this case, the position of the switch and the actual direc- tion of rotation of the fan are different, so the cooling fan reverse rotation pilot lamp flashes. Return the switch to its original position or stop the engine and operate the switch. EMERGENCY STEERING PILOT LAMP 0.
(Green) This monitor (3) lights up when the emergency steering is being actuated. If the engine stops when the machine is traveling or an abnor- mality occurs in the steering oil pressure circuit, and the machine is traveling at a speed of more than 2 km/h (1.2 MPH), the emergency steering is automatically actuated and the lamp lights up. If the lamp lights up, move the machine immediately to a safe place, stop the engine, and check the condition. In addition, the lamp flashes if the emergency steering is actu- ated continuously for one minute.
At the same time, “E02 EMR S/T OVERRUN“ is displayed on the character display, so move the machine immediately to a safe place, stop the engine, and check the condition. There is an emergency steering self-check function. For details, see “EMERGENCY STEERING SELF-CHECK FUNC- TION ( 3-96 )“ in the OPERATION section. OUTPUT MODE PILOT LAMP ( ENGINE POWER MODE) 0. This monitor (4) lights up when the power mode is actuated. If the accelerator pedal is depressed to the end position (kick down), the machine changes automatically into power mode. 3-26