Komatsu — METER DISPLAY PORTION

OPERATION EXPLANATION OF COMPONENTS TORQUE CONVERTER OIL TEMPERATURE GAUGE 0. This meter (1) indicates the torque converter oil temperature. It should be in the white range during operation. If it is in the red range during operation, the alarm buzzer will sound and the central warning lamp will light up. “E02 TC OVERHEAT“ is displayed on the character display, so run the engine under no load at a mid-range speed and wait until the meter enters the white range. ENGINE WATER TEMPERATURE GAUGE 0. This meter (2) indicates the engine water temperature. It should be in the white range during operation.

If it is in the red range during operation, the alarm buzzer will sound and the central warning lamp will light up. “E02 ENGINE OVERHEAT“ is displayed on the character display, so run at the engine under no load at a mid-range speed and wait until the meter enters the white range. If it is in the red range, the engine output is automatically lim- ited. HYDRAULIC TEMPERATURE GAUGE 0. This meter (3) indicates the hydraulic oil temperature. During normal operations, it should be in the white range. If it enters the red range during operation, the alarm buzzer will sound and the central warning lamp will light up at the same time.

“E02 HYD OVERHEAT“ is displayed on the character display, so run the engine under no load at a mid-range speed and wait until the indicator returns to the white range. FUEL GAUGE 0. This meter (4) indicates the amount of fuel remaining in the fuel tank. F: Full tank E: Fuel level is low When the amount of remaining fuel goes below 30 liters (7.93 US gal), the caution lamp inside the fuel gauge lights up. If it lights up, check and add fuel. 3-31