eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE WARNING engine or coolant leakage from the cooling system. If any problem is 3 - 54 WALK-AROUND CHECK engine, look around the machine and under the machine to check for loose nuts or bolts, or or coolant, and check the condition of the hydraulic system. Before starting the leakage of oil, fuel, or coolant, and check t he condition o f the hydraul ic system Check also for loose wiring, play, and accumulation of du st in places th at get ver y hot and are exposed to extremely high temperatures. Be sure to attach th e warning sign on the op eraation lever of the machine.

Leakage of oil or fu el, or accumulation of fla mmable materia l around high temperatu re parts, such as the engin e muffler or turbocharger, may cause fire. Check carefull y, and if any abn ormality is fou nd, repair it or contact yo ur Komatsu distributor. Always carry out th e following items before starting the e ngine each d 1. Check the dum p body, frame, tires, cyl inders, linkag e, and hoses for crack s or excessive wear or p lay. Check the dump bo dy, frame, tires, cylinder s, linkage, and hoses for cr acks or ex cessive wear or play, an d carry o ut repairs if any proble m is found. 2. Remove dirt fro m around engine, batte ry, radiator, a nd aftercoole r.

Check that there is no dirt or dust accumulated around th e engine, ra diator or a ftercooler. Ch eck also th at there is no flammable mater ial (dry leaves, twigs, e tc.) accumulat ed around th e battery, or engine, mu ffler, turbocharger, or other high temperat ure parts of the engine . Remove any dirt or flammable mat erials that are found. 3. Check for leaka ge of water or oil aroun Check that there is found, repair it. 4. Check for oil lea hose, joint 4. Check for oil lea kage from transmissio n case, differe ntial case, fi nal drive c ase, brake oi l tank, hydraulic tank, no oil leakage. If any problem is found, repair the place where the oil is leaking. f oil from the undercover.

Check the ground for traces of oil leakage. Check that there is no oil leakage. If any p roblem is foun d, repair the place wh ere the oil is le Check for leakage o f oil from the undercov er. Check the ground for tr aces of oi l leakage. 5. Check for loose air cleaner mounting b olts. Check for the loose bolts. If loose, tighten t hem 6. Check dump bo dy mount rubber Check for any crack s, embedded foreign o bjects, or loos 7. Check for dama ge to handrail, loose b olts Repair any damage and tighten any loose bolts