eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING CHECK OIL LEVEL IN FRONT BRAKE OIL TANK, ADD OIL CAUTION on oil has been added, then 3 - 56 Always perform the procedures in this s ection before starting the e Do not open the radiator cap unless nece ssary. Wait for the engin e to c ool down before chec king the coolant in t he sub-tank. Immediately aft er the engine is stopped, t he coolant is at a h igh te mperature and the radiator is under high inter nal pressure. If the cap is rem oved to check the coolan t level in this condition, there is a hazard of burns.

Wait for the tempe rature to go down, then turn the cap slowly to release the pressure befo re removing it. 1. Check that t he cooling water level is between the FULL and k gauge (G). FULL and LOW marks on radiator reserve tan If the water l evel is low, add water th rough the water filler ( 1) of the reserve t ank to the FULL level. 2. Check that abnormality. 3. After adding coolant, tighten the ca 4. If the volum e of coolant added is m er leakage. possible wat When adding oil to the brake oil tank, always use the recommended oi l. For details, see "RECOM MENDED FUEL, CO OLANT, AND LUBRICANT (PAG E 4-9)". 1. Check that t he oil is between the FULL and LOW (G).

l is low, add oil through oil filler (F). mark sight gauge If the oil leve l is low, add oil throug 3. If the oil leve l goes down right after check for lea kage in the oil lines.