eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING engine is stopped and may cause serious burns. Wait for the oil marks on the check the 6. If the oil level is correct, tighten the handle of the oil filler cap securely. 3 - 58 Parts and oil are at high t emperature immediately after the temperature to go down be fore performing this operation. 1. Check the oil level with dipstick (G). 2. Take out the dipstic k (G) and wipe off the oil with 3. Fully insert dipstick (G) into filler pipe (F), then re 4. The oil level should be between the H and L m side of dipstick (G). ENGINE STOPPED 5.

I f the oil is above the H mark, remove drain plug (1) drain valve (2) to dr engine oil level agai REMARK When checking the o il level after the engine has b een operated , wait for at least 15 mi nutes after stopping the engine. The dipstick has the oil level marked on both sides: ENGINE STOPPED for measuring when the engine is E IDLING for measuring when the engine is idling. il level, stop the engine and check with the ENGINE STOPPED side of the dipstick. check when the engine is idling, but the following procedure must be used. ine water temperature is in the green range. DLING side of the dipstick. r cap.

stopped, and ENGIN E IDLING for measuring whe n the engine i When checking the o il level, stop the engine and c heck with the ENGINE STOPPED si It is also possible to check when the engine is idlin g, but the following procedure must • Check that the eng ine water temperature is in th e green range • Use the ENGINE I • Remove the oil fille