eng — SHIFTING GEAR

. OPERATION OPERATION speed will be for the speed range while machine is traveling downhill, the 3 - 80 SHIFTING G EAR ear, do as follows. has an automatic transmission, so set gear shift When shifting g ear, do as follow This machine has an automati lever (1) to t automatically s he desired posi hift to a position t tion, and the tra o match the travel nsmission will speed. When the dum p body has risen, the speed range i s locked to 2nd speed at the D position and 1st speed at the 5 - L position. While traveling, lower the dump body. NOTICE When shifting between FORWARD and REVERSE, stop the machine completely, an d run the engine at low idle when shiftin g the lever.

After moving the ge ar shift lever, do n ot depress the acce lerator until you detect that the transmission clutc h has engaged. Do not operate the gear shift lever with the accelerator pedal depressed. This will caus e a big shock, and will also reduce the s ervice life of the machine. SHIFTING UP lerator pedal (2) is depressed to accelerate the 1. When acce machine, th to direct dri 2. If the mac automatica 1. When acce e lockup clutch is engaged to shift th e transmission ve. hine is accelerated further, the transmission will lly shift up.

SHIFTING DOW N edal (2) is released, the machine If accelerator p reduced, and th e transmission w ill automatically sh OVERRUN PREVENTION DEVICE If t he travel spe ed goes above t overrun preven tion device is act uated to act the re