eng — LOADING OPERATIONS

. OPERATION OPERATION STEERING THE MACHINE WARNING CAUTION when it has been turned fully to the left or right. This will make the oil accelerator pedal curve. Never 3 - 87 If the machine is turn ed at high speed or on a steep slop e, there is danger that it will turn over, so d such conditions. Do not continue to a pply force to the steering wheel w temperature in the cir cuit rise and will cause overheatin To turn the machin e when traveling, turn steering direction of the turn When traveling ar before entering the curve, shift down to a lower sp depress the accele coast around the c rator pedal to travel around th urves at high speed.

REMARK The angle of the steering wheel may change (th spoke may cha this is not a failu nge slightly) when the machine If force is applie d to the steering wheel when the turned fully to th at a time, but thi e left or right, the steering whee LOADING OPE RATIONS When using a large wheel loader to load large rock s, if the rocks are loaded directly into t dump body may be deformed. To prevent this, wh en loading large rocks, first load sand then load the rocks on top of this to reduce the im pact on the dump body. In addition, when lo ading rocks that exceed the fol lowing conditions, install the optional plate.

side over 0.5 m (1 ft 8 in) ss more than 4.5 (Mohs scale) ight of more than 300 kg (662 lb) ng steel ingots Rocks with one Rocks of hardne ss more than 4.5 (Mohs scale) Rocks with a we ight of more than 300 kg (662 l When transporti NOTICE When traveling, al ways set the dump lever to the FLO AT position regardless of whether the dum If the dump lever is not at the FLOAT position and the shift lever is not at the N position, the centr the alarm buzzer w ill sound.