. OPERATION OPERATION OPERATION OPERATION 4. When dump lever (3) is moved to the LOWER position, the dump body will start to move down. distance, the engine or hoist cylinders. When the dump body has risen, the speed range is locked to 2nd if shift lever is at the D position. While traveling, lower the dump body. 3 - 89 5. When the dum p body has moved down a certai move dump leve released, it will r will then move d In the dump bo speed when the to avoid any i r (3) to the FLOAT position. (When eturn to the FLOAT position.) The own under its own weight.
dy raising operation, slow down dump body has risen near the max mpact load on the hydraulic circ PRECAUTIONS FOR OPERATION When traveling o n roads in rain or snow, or when trav eling on muddy or soft ground, con sider the loaded condition of the machine a nd be extremely careful not to let t he tires slip or the machine spin an d sink into the ground. If the engine sho uld stop when the machine is travel ing, stop the machine immediately , then move the gear shift lever to the N po sition, and start the engine again.
If the central war ning lamp and pilot lamp for any E MERGENCY item on the machine monitor should flash and the buzzer sound s during operation, stop the machi ne immediately and investigate th For details, see " TROUBLESHOOTING (PAGE 3-1 When loading, be careful to load the dump body uni formly, and be particularly careful t o avoid loading too much at the front. On slippery road surfaces, apply the retarder contro l lever slowly and shift the transmi ssion down to preven t the rear wheels from locking. When traveling th rough pools of water, water may g et inside the front brakes and caus e a big drop in the braking force, so drive ca refully in such areas.
If water shou ld get into the brakes, apply the b rakes several times while traveling to produ ce friction heat between the pad a nd disc to remove the water.