eng — HANDLING TIRES

. OPERATION OPERATION HANDLING TIRES PRECAUTIONS WHEN HANDLING TIRES WARNING below must be replaced with Please contact your Komatsu distributor when replacing the tires. It is dangerous to jack up the machine without taking due care. 3 - 93 To ensure w tires. ne Tires wh ere the bead wire has been Excessi carcass vely worn tires where more t ply (excluding the breaker) i Tires wh Tires wh ere damage to the carcass e ere ply separation has occu Tires wh ere radial cracks extend to t Tires wh and the ere there is abnormal deteri tire cannot withstand use.

T.Km.P.H (Ton-Km-Per-Hour R Tires for c onstruction equipment ar e used under severe conditions that bear no compar ison with the tires used on cars, buse s, or ordinary trucks, so t hey are specially designed to withstand these condi Compared with ordinary tires, far g reater heat is produced in the rubber internal parts of off-road tires when the machine i s traveling. If they are us ed continuously under conditions which exceed the permitted load and travel speed of t he tire, the internal temper ature will exceed the limit, and the rubber may becom e soft and heat separation occur. To preven t such problems from occ urring, the T.Km.P.H.

is used as a standard to allow th e machine to travel safely. If o peratio ns are carried out which exceed the T.Km.P.H. of the tire (when the T.Km.P.H . of the work exceeds the T.Km.P.H . of the tires), tire trouble will occur more frequently. In such cases, do as follo ws. owered. Make th e operating conditions e asier so that the operation T.Km.P.H. of the work is l Increas e the size of the tires to a tire with a high T.Km.P.H.