eng — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING 3 - 105 This machine must not be towe d except in emergencies. When towing the machine, take the following precautions. When towing a machine, tow it at a low speed of less than 2 km/h (1.2 MPH), an d for a distance of a few meters to a place where repairs can be carried out. The machine should be towed only i n emergencies. If the machine must be moved long distanc es, use a transporter. same class as the machine being towed. Use a towing machine of the Check that the towing machi ne has ample braking power, weight, and rimpull to a llow it to control both machines on slopes or on the tow road . oth the towing machine and the machine being towed.

Use the specified hook for b oth the towing machine and the machine being towe To protect the operator if the towing wire or towing bar breaks, install protective pla tes on both the towing machine and the machine being towe d. There are towing hooks insta lled to the bottom of the front frame and to the rear a xle. Do not use any other p lace as a towing hook. check the condition of the hook to make sure that there is no problem. g wire as small as possible. center lines of the two machines to within 30 degrees. under various differing conditions, so it is impossible to determine beforehand the ads will require the minimum rimpull, while towing on slopes or on uneven road ximum rimpull.

When fitting the towing wire, check the condition of the hook to make sure that t Keep the angle of the towin Keep the angle between the center lines of the two machines to within 30 degre Towing may be carried out requirements for towing. Towing on flat horizontal ro surfaces will require the ma If the pressure in the air tan k has dropped abnormally because of leakage of air from the air circuit, the parking brake and emergency brake are applied, so release both brakes before towing t he machine. Before releasing the parking brake, always put blocks under all four wheels. If th e wheels are not blocked, t here is danger that the machine may move.

Connect with the towing wir e or drawbar, and remove the blocks from the wheel s when the disabled machine is in a condition where it cann ot run away. tion to release the parking brake, check that the surrounding area is safe. ed, the brakes will not work, so pay careful attention to safety. When carrying out the opera tion to release the parking brake, check that the sur If the parking brake is releas ed, the brakes will not work, so pay careful attentio When towing down a slope, use two towing machines. One machine should be u phill from the disabled machine and should be connected wit h towing wire or a drawbar to pull the disabled machi ne back and keep it stable.

The other machine should tow th e disabled machine downhill.