. OPERATION TROUBLESHOOTING METHOD OF RELEASING PARKING BRAKE WARNING 3 - 107 RELEASE METHOD WHEN PARKING BRAKE AND EMERGENCY BRAKE HAVE BEEN ACTUATED IN EMERGE I f the pressure in the air tank ha s dropped abnorm ally because of leakage of air from the air c ircuit, the parking brake and emergenc y brake are appli ed automatically. After emergenc y actuation of the brakes, if they are not released, release the br Please ask yo ur Komatsu distr ibutor to release th e parking brak If there is a fa ilure in the air circ uit, the brakes will no t work. It is dangerous to drive the machine i n this condition, so always tow the mach ine at low speed.
When towing, run the engine so that i t is possible to steer the mac hine. When releasi ng the parking bra ke, carry out the ope ration on flat gr ound and check that the surr ounding area is safe. If the parking brak e must be released on a slope because o f an emergency or some other unavoidable re ason, put blocks under the wheels befor e releasing the bra ke. After emergen cy actuation of t he parking brake, i f the parking b rake is not released even when the parking brake valve lever is placed at the TR AVEL position, rele ase the parkin g brake as follows. 1. Remove air charge socket (1) installed to the front air tank. 1. Remove a ir charge socket (1) installed to the 2.
Remove t he air hose from parking brake ch o chamber (2). arge hose (3) (su amber (2), the pplied with th install rem oved socket (1) t 3. Install one end of air ch machine) t installed a o air charge sock et (1). (The hose a nd socket can b t a touch.) 4. Push the o ther end of air c harge hose (3) into valve (4) of th tire. Air is parking br supplied to the parking brake chamber, and th ake is released. 5. When the parking brake is released, tow the m achine immediately to a safe position. F or details of the method see "METHOD O F TOWING MAC HINE (PAGE 3