eng — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 GUIDES TO MAINTENANCE Do not perform any i nspection and maintenance operation that is not found in this KOMATSU GENUINE R EPLACEMENT PARTS: Use Komatsu genui ne parts specified in the Parts Book as rep ALWAYS USE CLEAN WASHER FLUID: Use automobile wind ow washer fluid, and be careful not to let ALWAYS USE CLEAN OIL AND GREASE: Use clean oil and gr ease.

Also, keep the containers of the oil a nd grease clean. Keep foreign materials away from oil and grease. CHECKING FOREIGN MATERIALS IN DRAINED OIL AND ON FILTERS: After oil is changed o r filters are replaced, check the old oil and fil ters for metal particles and fore ign materials. If l arge quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out harge, an carry OIL CHANGE: If your machine is eq uipped with a fuel strainer, do not remove WELDING INSTRUCTIO NS: e starting switch. e than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded.

If grounding cable is connected near ectors, etc., the instruments may malfunction. Turn off the engin Do not apply mor Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may malfunct If a seal or bearing happens to come between the part being welded and grounding point, c hange the grounding point to avoid suc h parts. ea around the hydraulic cylinders as the grounding point. damage to the plated portion. Do not use the ar ea around the hydraulic cylinders as the gr Sparks will cause damage to the plated portion. DO NOT DROP THINGS INSIDE MACHINE:

When opening ins pection windows or the oil filler port of the tank to carry out inspection, be careful not to drop nuts, bolts, or tool If such things are lead to failure. If s inside the machine. dropped inside the machine, it may cause damage and/or malfunction of the machine, an d will you drop anything inside the machine, alw ays remove it immediately. r inspection. Do not put unnec essary things in your pockets. Carry only t hings which are necessary fo r inspection.