eng — OUTLINE OF ELECTRIC SYSTEM

. MAINTENANCE OUTLINE OF SERVICE 4 - 7 STORING OIL AND Keep indoors to pr event any water, dirt, or other impurities fro When keeping dru m cans for a long period, put the drum on its s ide so that the filler port of the drum s is at the side to prevent moisture from being sucked in. If drums have to be stored outside, cover them with a waterpro of sheet or take other measures to protect t hem. To prevent any cha nge in quality during long-term storage, be s ure to use in the order of first in - fir st out (us e the oldest oil or fuel fir FILTERS Filters are extreme ly important safety parts. They prevent impurities in the fuel and air circuits from entering nt and causing problems.

eriodically. For details, see the Operation and Maintenance Manual. important equipme Replace all filters p eriodically. For details, see the Operation a However, when wo rking in severe conditions, replace the filter s at shorter intervals according to t he oil an d fuel (sulfur content) bei ng used. he filters (cartridge type) and use them again. Always replace with new filters. Never try to clean t he filters (cartridge type) and use them aga in. Always replace with new filters. When replacing oil filters, check if any metal particles are attach ed to the old filter. If any metal parti cles are fo und, contact your Koma tsu distributor.

e engine oil filter, fill the new filter with the specified clean oil, then install it. of spare filters until just before they are to be used. nuine filter elements is strongly recommended. When replacing th e engine oil filter, fill the new filter with the s Do not open packs of spare filters until just before they are to Use of Komatsu ge nuine filter elements is strongly recommen OUTLINE OF ELECTRIC SYSTEM It is extremely dan gerous if the electrical equipment becomes wet or the covering of the wiring is d amaged. This will cause an elect rical short circuit and may lead to malfuncti on of the machine. Do not wash th e inside o f the operator's cab wit components. h water.

When washing the machine, be careful not to let water get into the electrical Service relating to the electric system is checking fan belt tens ion, checking damage or wear to th e fan bel t and checking battery fl uid level. lectric components other than those specified by Komatsu. Never install any e lectric components other than those specifi External electro-m agnetic interference may cause malfunction of the control system controller, b efore installing a radio receiver or other wireless equipment, contact your Kom atsu distributor. tem to prevent corrosion.

When working at th e seashore, carefully clean the electric sys When installing an operator's cab cooler or any other electrica l equipment, connect it to an indep endent p ower source connector. The cables to supply power to the optional equipment must never be connect ed to the fuse, starting switch, or battery relay.