eng — CHECK LENGTH OF SUSPENSION CYLINDER, CHECK OIL LEVEL

. MAINTENANCE SERVICE PROCEDURE suspension cylinder cover is within on the label when the machine is unloaded and on flat ground. Buffering specification 236 - 256 mm (9.3 - 10.1 in) 474 - 494 mm (18.7 - 19.5 in) 65 mm (2.6 in) After checking, contact your Komatsu distributor for repairs if any problem is found. 4 - 26 CHECK LENGTH OF SUSPENSION CYLINDER, CHECK OIL LEVEL When traveling, if the unevenness of the ro ad surface is transmitte d directly to the chassis (the machine bounces or the cylinders r etrac t and hit the stopper) , carry out the following checks.

CHECK LENGTH OF CYLINDE Front Check ottom range (A) shown by t he arrow At the same time , whe n the machine is not l oaded, remove cover (1) , then measure dimensi on (B) from the shoulde of the rod head of the suspension cylinder to the t op surface of the flange. Standard specification (B) 252 - 272 mm (9.9 - 10.7 in) Reference (C) 474 - 494 mm (18.7 - 19.5 in) Flange thickness (D) 49 mm (1.9 in)