. MAINTENANCE SERVICE PROCEDURE ADJUST BODY POSITIONER WARNING Standard length A: 180 mm (7.1 in) 4 - 30 If for any reason the m strictly follow the nex One should sit on aintenance is performed while the engine is runnin t rules. the operator's seat, preparing to stop the engine any moment, and contact with the other. Set the dump leve r at HOLD position to preven t the dump body fro moving. Also, set t prevent the machi he parking brake valve lever at PARKING position ne from moving. When working nea r fan or belts, do not bring you r body or an y materi closer that can be dragged into. Do not touch the o peration lever.
If for any reaso n you have t o move t lever, be sure to co safe area. ntact with the other person to let him/her move to t If the materials or tools are dropped onto fan or belts, they fly away cut. Never drop or insert materials or tools. With the positioner device, it is possible to a utomaticall y stop t dump body when it rises to the desired positio n (to the d ump bo elevation). Adjust still remains. if it does not automatically stop or if the sho ADJUSTING 1. Set the dump l ever to the HOLD position 2. Adjust push ca ble (1) to the standard len 3. Raise the dum p body until the hoist cylind er is 50 m m (2.0 in ) before t he end of its stroke, th en stop the engine