. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DIFFERENTIAL CASE, ADD OIL WARNING CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 38 EVERY 250 HOURS SERVIC Maintenance for ev ery 100 hours should be carried o ut at the same The parts and oil ar e at high temperature im mediately aft er the engine is stopped, and may cause s erious burns. Wait for the temperature to go d own before starting the operation. When r emoving plu g, oil may spout out. So turn the plu g gradually to release the internal pressure , then carefully remove it. 1. Remove plug (G ) and check th at the o il level is ne ar the bottom of the plug hole. 2.
If the oil level is too low, add o il throu gh the plug hole until the oil overflows. The parts and oil ar e at high temperature im mediately aft er the engine is stopped, and may cause s erious burns. Wait for the temperature to go d own before starting the operation. If there is still press ure remaining i nside the case, the oi l or plug may fly Loosen the plug slo wly to release t he press 1. Stop the machin e so that casti ng line ( 1) is horizo ntal and drain plug (P) is imme diately at the bottom. 2. Remove plug (G ) and check th at the o il level is ne ar the bottom of the plug hole. 3. If the oil level is too low, add o il throu gh the plug hole until the oil overflows.