. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING before changing it. - 1 turn. 4 - 53 EVERY 500 HOURS S Carry out maintenance for EVERY 100 HOURS and EVE RY 250 HOURS SERVICE at the s The parts and oil is at high temp erature after the engine has been operated, and it can result in a burn. Wait for the oil to cool down Refill capacity: 130 liters Prepare a filter wrench 1. Set a container to catch the oil immediately under the drain valve 2. Remove drain plug (1), then loosen drain valve (2) slowly to avoid getting oil on your self, and drain the oil.
Be care ful not to loosen the drain valve to o far and deform the stopper p in inside the valve. When draining the oil, fi t a standard hose to the drain valve to prevent the oil from spr 3. Check the drained oil particles or foreign ma distributor. 4. Tighten drain valve (2) Tightening torque Drain plug (1), drain val Tightening torque Drain plug (1), drain val (7 ± 1 kgf·m, 50.6 ± 7. turn 4 full-flow filter cartridge 5.
Using the filter wrench, s (3) and 2 bypass filter cartridge s (4) to the left to remove the When doing this, to prev ent getting oil on yourself, do not carry out this operation from i mmediately under the cartrid In particular, if this ope ration is carried out immediat stopping the engine, a la rge amount of oil will come ou t, so wait for 10 minutes before st 6. Clean the filter holder, f ill the new filter cartridge with oil, then coat the seal and threa (or coat thinly with grease) and i 7. When installing the filt packing face is in contact with th e filter holder, then tighten a fu rther 3/4