. MAINTENANCE SERVICE PROCEDURE REPLACE STEERING, HOIST OIL TANK AND REAR BRAKE COOLING OIL TANK FILTER ELEMENT WARNING may cause burns. Wait for the LUBRICATION 4 - 60 T he emperatu re to go do wn before starting W hen rem oving the o il filler cap, turn it slowly to release the i nternal pressure, then remov 1. pressur e, then re move the cap. 2. Remov e bolt (1), then remove cov 3. Take ou t the elem ent, then wash th e inside of the case and the remove d parts. 4. Install t he new ele ment, then insta ll cover (2) wit h bolt (1).
If the fil ter eleme nt clogging cauti on lamp lights up w hen the engine water tem perature gauge is in the green r ange and the engine is running at 1200 - 2100 rpm, replace the element element immediately. 1. Using a grease p ump, pump in gr ease through g reas e fittings marked by arrow 2. After gr easing, wi pe off any old gr ease that was pushed out (1) Fan pull ey (1 plac (2) Tension pulley (2