eng — CHANGE OIL IN DIFFERENTIAL CASE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING CHANGE OIL IN DIFFERENTIAL CASE WARNING is stopped, and may cause burns. Wait for the 4 - 65 The parts and oil are at high temperature i mmediately after the engine is stopped, and may cause s erious burns. Wait for the temperature to go do wn before starting th e operation. If there is still pressu re remaining inside t he case , the oil or plug may fly Loosen the plug slow ly to release the pre Refill capacity (left and right each): 5 9 liters (15.58 U S gal) 1. Stop the machine so that casting line (1) is horizonta l and drain plug (P) is at the 2. agai 3.

Add oil through th e hole for plug (G) to the specified level 4. After adding oil, c heck that the oil is at the specified level. See "CHECK OIL LE (PAGE 4-38)". VEL IN FINAL DRIVE CASE, ADD OIL DRIVE ADD The temperature to go do wn before starting th e work. When r emoving the o il filler cap, turn it sl owly to release th e internal p Refill capacity: 132 liters (34.85 US g 1. Remove drain plug (P), drain the oil, then tighten the plug again. Add oil through the hole for plug (G) to the specified level. plug agai 2. Add oil through th e hole for plug (G) to the specified level 3. After adding oil, c heck that the oil is at the specified level.

See "CHECK OIL LE VEL IN DIFFERENTIAL CASE, ADD OIL ADD (PAGE 4-38)".