. ATTACHMENTS, OPTIONS TACHOGRAPH (TCO 15-6) VOLTAGE INDICATION LABEL 6 - 15 NAME PL This (20) indicates the type and mo This labe l (21) indicates the voltage METHOD OF USING KEY (1) with no mark is used for There ar e three types of key. Key for opening and locking the instrument . Key (2) (marked with No . 1) is chang e key 1, and key (3) (mark ed with No. 2) is change ke y 2. With the operatio se three keys, it is possib n and the change of operat le to know the details of the or. To use th e change key, remove the instrument open/lock key a nd insert ch ange key 1 in the same ke y hole, then turn 45° in the No. 1 directio n. Use cha nge key 2 in the same way and turn to the No.
2 direction. The cha nge key will only turn in the The cha nge keys cannot be used t Recordin g width of chart When us ing key with no mark: 1.45 When us ing key with No. 1 mark: 2 When us ing key with No. 2 mark: 0 METHOD OF USE 1. Check the operation of clock. Watch through clock operatio confirm that the clock is workin The clock is electric, so there is 2. Open the cover. Insert the instrument open/l counterclockwise 90°, then pull The cover can be opened appro than that, or pull it strongly, or p as these will cause failures. n confirmation aperture (1) to g. no need to wind it up. ock key in hole (2), turn open carefully. 1. Chec Watc confi The 2.
Ope Inser coun The than as th h through clock operatio rm that the clock is workin clock is electric, so there is n the cover. t the instrument open/l terclockwise 90°, then pull cover can be opened appro x. 115°. Do not open it further that, or pull it strongly, or p ut anything heavy on the cover, ese will cause failures.