eng — METHOD OF USE

. ATTACHMENTS, OPTIONS REVO TACHOGRAPH (TCO 15-7) ADJUSTMENT SCREW FOR RPM WARNING LAMP (1), turn 6 - 19 INSTRUMENT LIGHTING This lamp (19) is used f NAME PLATE This (20) indicates the t VOLTAGE INDICATION This label (21) indicate RPM RECORDING STYL US This (22) records the m omentary engine speed on th The speed at which the lamp gives a warning can be set as desired with this SPEED CONFIRMATION APERTURE FOR RPM WARNING LAMP INDICATION This (24) is the speed i ndication aperture for setting the desired speed o TOTAL REVOLUTION C This meter (25) indicate s the total number of revoluti ons (x 1000) of the METHOD OF USE 1. Open the cover.

Insert the instrum counterclockwise 9 ent open/lock key in ho 1. 1. Insert the instrum counterclockwise 9 0°, then pull open carefully. The cover can be o pened approx. 115°. Do not o pen it further than that, or pull it st rongly, or put anything heavy on the cover, as these will cause failures. 2. Turn time setting kn Always set the time with the time setting knob. T urn the hand n the direction of ro tation 10 minutes beyond the correct time, then turn back to th e correct time. Check the clock op eration with the movement of minute hand. The clock is electric , so there is no need to wind it up. 3. Fill in chart. Before inserting ne w chart paper, always fill in the required items.

(Operator code No., machine code No., date etc.) ms with a steel pen. Fill in the above ite Handle the charts caref ully with clean hands, and do not fold or scratch them