. ATTACHMENTS, OPTIONS USING DIFFERENTIAL LOCK DIFFERENTIAL LOCK PEDAL This pedal (1) actuates the differential lock control. When the pedal is depressed, the differential lock is actuated; when the pedal is released, the differential lock is cancelled. 6 - 22 REMARK When traveling on soft ground where the wheel on one side slips, or when traveling on road surfac es where the tires are likely to slip, depress the differential lock pe dal. This actuates the differential lock and makes both the left a speed to prevent slipping.
nd right wheels rotate at the same PRECAUTIONS AND MET HOD OF USE Depress the differential lock pedal to actuate the differential lock 5 to 1 0m (16 ft 5 in to 32 ft 10 in) b efore e ntering the area where the tires may slip. REMARK Using the differential lock before the tires slip makes it possible to o btain t he full ca pacity of t he differential lo ck, and also extends the tire life. If the differential lock is appli ed when the tires are already slipping, th e durabil ity may be reduced Do not actuate the differentia l lock when the tires are slipping.
If the tires should slip and it b ecomes impossible to escape, sto p the m achine, then depr ess the d ifferent ial lock pedal and start the machine again. When traveling on road surfa ces where the tires may slip, be particularly careful to avoid su dden changes i n travel speed (decelerating or accel erating). Do not use the differential lo ck pedal when traveling at high speed (4t h gear, 2 0 km/h (1 2.4 MPH ) and a bove). Do not use the differential lo ck pedal when turning. when turning, it will cause the following problems.
If the differential lock is used It will be more difficult to tu curves where it could nor The inside wheels and ou reduce the tire life, and it In order to absorb the diffe the differential lock disc w An excessive load will be If the differential lock is used when turning, it will cause the following p roblems It will be more difficult to tu rn than when the differential lock is not us ed, so t he truck m ay be unable to turn on mally turn easily. tside wheels will turn at the same speed when turning, so one side will spin and may also damage the road surface.
The inside wheels and ou may also damage the road surface In order to absorb the diffe rence in rotation of the left and righ t tires which is caused w hen the machin e turns, ill slip, and this will reduce the durability o f the dif ferential lo ck. ife of the final drive. An excessive load will be brought to bear on the final drive, and thi s may re duce the l ife of the final d NOTICE If t he tires are likely to slip on the r oad surface on curves, carry out maintenance of the roa d surface t o reduce this prob