eng — TROUBLESHOOTING

. ATTACHMENTS, OPTIONS OPERATION OF ABS AND ABS/ASR PRECAUTIONS FOR USE WARNING 6 - 26 If the ABS functions w hile traveling on a slippery road, the b raking distance may be slightly lengthened. Even if the ABS is turned on, the tires ma y lock when the machine is braked w hen running at a very low speed . Accordingly, take ca re when driving on slippery roa ds. If the machine is brake d while running at high speed or on a slippery road, more air is consu med by the ABS/ASR. If the air pressure drops and th e warning buzzer sounds, stop the machine in a safe place. Wait until the air pressure is restored gain.

restored sufficiently, then start a Even with the ABS/ASR system installed, there may be instan ces where the machine can not travel safely such as o n a road having an extremely lo w coefficient of friction (a frozen road , etc.) or on a steep slope. In thi s case, repair the road surface before driving. The machine can be travel normally even if the ABS/AS R main switch is turned off. I n this case, however , watch out for lateral skiddin g of the machine. Even if the ABS/ASR system malfunctions, the machin e can be travel normally. Wat ch out for lateral skid ding in this case, however, while traveling on slippery roads.

I f the warning lamp lights up, the system is automatically turned off and the AB S/ASR system does not function. cy brake function is maintained. ke pedal depressed or the retarder control lever pulled, S valve. This does not indicate a fault. Even if the ABS/ASR system is installed, the emergen cy brake function is maintain If the ABS/ASR mai n switch is turned on with the bra ke pedal depressed or the r exhaust sound will b e momentarily emitted from the AB S valve. This does not indic If both rear wheels sl ip at the same speed, the ASR wi ll not function. In this case, a djust the engine outp ut with the accelerator peda l.

When installing a wir eless device on the machine, sele ct one which does not violate the wireless device-related laws/regulations and use it according to law. Mount it as far away from the devices and wiring harness of the possible. ABS/ASR system as TROUBLESHOOTI NG When the starting sw itch is turned on, if the warning lam p does not light up, it may be broken. In this case, replace the lamp. If the ABS/ASR syste m malfunctions while being used, the warning lamp (Red) will li ght up. In this case, s top the machine at a safe pl ace immediately, then ask your Ko matsu distributor to carry ou t repair.

The positions of each s witch and the statuses of the corr esponding warning lamps are AB Starting switch Mai S/ASR Warning lamp n switch OFF OFF Goes off OFF ON Goes off ON OFF Lighted (Normal) ON Stays lighted until travel speed rises to about 10 km/h (6.2 MPH), ON then goes off (Normal). Lights up when a fault occurs (Malfunction).