. OPERATION EXPLANATION OF COMPONENTS (1) User code display WARNING 3 - 6 USER CODE DIS PLAY red on the machine or if the operation needs to be changed or if checks and maintenance are If any failure occur peration needs to b e change s and maintenanc required, the user code display (1) shows the us er code indicating appropria te corrective action. At this time , the monitor related to t he abnormal area lights up or flashes, and the ce ntral warning light flas hes. If user code 02 or 04 i s displayed, stop the machine imm ediately. See "SERVI CE CODE ( PAGE 3-118)", and check t he service code number.
Contact Kom atsu distributor, telling them the service code number , for repair If letter "E-" and an y user code of "01 to 07" is dis played in turn at th e upper ri ght of the liqu id crystal display o n the monitor panel, stop the machine once. Then, tak e the corrective act ion as fol lows after ch ecking use r code ( User code 02: Park the machi ne at a safe location and cont act your Komatsu d istributor 04: Carry out an e mergency stop. Stop the engin e and contact you r Komats u distributor. 01: Carry out chec ks and maintenance according to the Operation a nd Maintenance Man 03: Operate the m achine keeping the engine at l ow revolution and l ow travel 05: Stop the machi ne.
Run the engine at a mid-r ange speed under 06: Restart the eng ine. Idle the engine for a while 07: Do not raise th If the user code is displayed again even after t aking the correctiv e action s hown above when the user cod e 01, 03, 05, 06, or 07 is displayed, check the sevic e code.