. OPERATION EXPLANATION OF COMPONENTS ENGINE OIL PRESSURE lamp goes out. 3 - 12 This (6) warns the opera tor that the engine lubricating oil pressure has dropped. If it lights up and display s user code 04 at the same tim e, stop the machine safely. Then, s top the engine and carry out i nspection. The lamp lights up if the engine lubricating oil pressure goes below the specified value whe n the engine is running, ng, the lamp does not light up. If the engine is not runni ng, the lamp does not light up. ANGLE WARNING When the dump body is raised, this monitor (7) warns t he operator that the machine has tilt right.
ed beyond the safety range to the left or If it lights up and display s action code "07" at the same time, lower the body and move the machine to a safe, stable plac e. REAR BRAKE CAUTION LA MP This monitor (8) lights up if the brake oil pressure drop s under the normal value. If it lights up and disp immediately check the r After checking and repa lay user code "04" at the same time, ear brake system. iring, depress the rod for the overstroke sensor on the brake cha If depressing is not carr continue to light up. mber.
ied out, the rear brake caution lamp will STEERING OIL TEMPERAT URE s the operator that the steering oil user code "05" at the same time, stop the lever at the N (neutral) position, then run d at a mid-range speed until the warning This monitor (9) warn temperature has risen. If it lights up and displays machine, place the shift the engine under no loa