Komatsu — Maximum Speed Data

Payload Meter III - Section 60 OM6009 8/11 Page 60-12 Frame Torque Data Payload meter records the top five peak positive and negative frame torque values and the time they occurred. The frame torque is a measure of the twisting action along the centerline of the truck. Positive frame torque is measured when the suspension forces on the front of the truck act to twist the frame in the clockwise direction as viewed from the operator's seat. Negative frame torque is measured when the forces from the suspensions act in the opposite direction. Sprung Weight Data The payload meter is constantly monitoring the live payload calculation.

This value naturally rises and falls for a loaded truck depending on road and driving conditions. The payload meter records the top five highest payload calculations and the time they occurred. This information is stored in permanent memory inside the meter. Maximum Speed Data The payload meter records the top five highest speeds and the time they occurred. This information is stored in permanent memory inside the meter. For example, if the left front and right rear pressure rises as the right front and left rear pressure drops, the truck frame experiences a twisting motion along the longitudinal centerline. In this case, the payload meter will record a positive frame torque.

The five highest values in the positive and negative direction are stored in permanent memory within the payload meter.