GETTING TO KNOW YOUR VEHICLE 29 3. Push the set (S) button on the memory switch, and then push the desired memory button (1 or 2) within five seconds. The instrument cluster display will display which memory position has been set. 4. Push and release the lock button on the key fob within 10 seconds. SEATS Seats are a part of the Occupant Restraint system of the vehicle. NOTE: Your key fobs can be unlinked from your memory settings by pushing the set (S) button, and within 10 seconds, followed by pushing the unlock button on the key fob. M EMORY P OSITION R ECALL WARNING! NOTE: Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.
L INKING A ND U NLINKING T HE R EMOTE K EYLESS E NTRY K EY F OB T O M EMORY It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. 2 NOTE: If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the instrument cluster display. To recall the memory settings for driver one or two, push the desired memory button (1 or 2) or the unlock button on the key fob linked to the desired memory position. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
In a collision, people riding in these areas are more likely to be seriously injured or killed. Your key fobs can be programmed to recall one of two saved memory profiles. NOTE: Before programming your key fobs you must select the “Personal Settings Linked To Fob” feature through the Uconnect Settings Ъ page 159. To program your key fobs, perform the following: Be sure everyone in your vehicle is in a seat and using a seat belt properly. A recall can be canceled by pushing any of the memory buttons during a recall (S, 1, or 2), or by pushing any of the seat adjustment switches. When a recall is canceled, the driver's seat and telescopic steering column (if equipped) will stop moving.
A delay of one second will occur before another recall can be selected. 1. Place the vehicle’s ignition in the OFF position. 2. Select a desired memory profile, 1 or 2. 3. Once the profile has been recalled, push and release the set (S) button on the memory switch. Then, within five seconds, push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster display.