Yanmar — 4.3.1 Disassembly

4. Disassembly and reassembly (7) Removing the alternator 1) Loosen the set bolt (belt adjuster bolt) and move the alternator downwards. Loosen the V-pulley set bolts for the cooling water pump and remove the V- belt. 2) Remove the belt adjuster from the gear case and remove the alternator from the cylinder head (with bracket). (8) Removing the cooling water pipes (seawater/ fresh water) 1) Remove the seawater pipe (seawater pump-heat exchanger). 2) Remove the fresh water pipe (fresh water pump - heat exchanger, coolant tank - fresh water pump).

Mixing elbow Coolant tank Heat exchange Exhaust manifold Fresh water pump From seacock Seawater pump (Cooling water pipes) 80 e t - d h Alternator Bracket Set bolt V-belt Belt adjuster (3YM30)