Yanmar — 5.2.3 Intake/exhaust valves, valve guides

5. Inspection and servicing of basic engine parts (4) Valve guide 1) Measuring inside diameter of valve guide. Measure the inside diameter of the valve guide and replace it if it exceeds the wear limit. mm NOTE: The inside diameter standard dimensions assume a pressure fit. 2) Replacing the valve guide Use the insertion tool and tap in the guide with a mallet. The intake valve guide and exhaust valve guide are of different dimensions. 3) Valve guide projection a) Put liquid nitrogen or ether (or alcohol) with dry ice added in a container and put the valve guide for replacement in it for cooling. Then insert it in with a valve guide inserting tool.

Tool Valve guide Cylinder head Do not touch the cooled valve guide with bare hands to avoid skin damage. Tool b) Check the inside diameter and finish to the standard inside diameter as required with a reamer. Check the projection from the seat surface of the valve spring. Valve guide Valve guide projection (mm) 9.8-10.0 Stem seal Clearance Valve guide Valve guide projection Stem seal projection 111 Standard Limit Valve guide inside dia. Intake 6.000-6.012 6.08 Exhaust 6.000-6.012 6.08 Clearance Intake 0.025-0.052 0.16 Exhaust 0.040-0.067 0.17