Yanmar — 6.1.8 Major faults and troubleshooting

6. Fuel injection equipment 143 Fault Cause Remedy 7. Loud knocking. (1) Injection timing is too fast or too slow. (2) Injection from nozzle is improper. Fuel drips after each injection. (3) Injection nozzle starting pressure is too high (4) Uneven injection. (5) Engine overheats, or insufficient compression. Adjust Adjust Adjust Adjust Repair 8. Engine exhausts too much smoke. When exhaust smoke is black: (1) Injection timing is too fast. (2) Air volume intake is insufficient. (3) The amount of injection is uneven. (4) Injection from nozzle is improper. Adjust Inspect and repair Adjust Repair or replace When exhaust smoke is white: (1) Injection timing is too slow.

(2) Water is mixed in fuel. (3) Shortage or lube oil in the engine. (4) Engine is over-cooled. Adjust Inspect fuel system, and clean Repair Inspect