Yanmar — 7.1.1 Breather system (A reductor to intake air system of blowby gas)

7. Intake and exhaust system 7. Intake and exhaust system 7.1 Intake system Air enters in the intake silencer mounted at the end of the intake manifold (rocker arm cover). It is fed to the intake manifold and then on to each cylinder. Exhaust gas goes into exhaust manifold (in the fresh water tank) mounted on the cylinder head outlet. After cooling, the exhaust gas enters the mixing elbow, which is directly connected with the exhaust manifold, and is discharged from the ship along with seawater. When the inside of the intake manifold becomes dirty, intake air resistance is increased and reduces engine power. Periodically check the inside of the intake manifold.

In the same way, the intake air silencer should be checked for dirt periodically and cleaned. Care should also be taken to insure there is no air leakage. Do not operate with the intake air silencer removed. Intake pipe Cylinder head Intake silencer 7.1.1 Breather system (A reductor to intake air system of blowby gas) Diaphragm cover Spring Center plate Diaphragm Rocker arm cover Emitting blowby gas is harmful to natural environment. Therefore blowby gas reductor is adopted as breather system. Some of the combustion gas passes through the clearance between cylinder and piston, and flows to the crankcase. This is said as blowby gas.

While it passes into cylinder head and rocker arm cover, the blowby gas mixes with splash oil, and becomes oil mist-blowby gas. The gas passes through the baffle plate inside a rocker arm cover. And it passes through a diaphragm assy, and reaches a intake silencer. The gas is reduced in the combustion chamber. Pressure inside a crankcase is controlled by the function of the diaphragm assy, and suitable amount of blowby gas is reduced in intake air system.

Breather baffle Baffle plate Intake manifold (Breather system component) [Disassemble] When a rocker arm cover is taken off, check whether oil or the like enter the diaphragm space from a small hole on the side of a diaphragm cover or not without disassembling the diaphragm. Blowby gas Diaphragm Spring Diaphragm cover Baffle plate Rocker arm cover Cylinder head (Blowby gas flow) 149