Yanmar — 9.3.2 Specifications of fresh water pump

9. Cooling water system 9.3 Fresh water pump 9.3.1 Fresh water pump construction The fresh water pump is of the centrifugal (volute) type, and circulates water from the fresh water tank to the cylinder block and the cylinder head. The fresh water pump consists of the pump body, impeller, pump shaft, bearing unit and mechanical seal. The V-pulley on the end of the pump shaft is driven by a V-belt. The bearing unit assembled in the pump shaft uses grease lubricated ball bearings and cannot be disassembled.

9.3.2 Specifications of fresh water pump 162 Cylinder head Cylinder block Gasket Thermostat Cover Gasket Water temperature switch Spacer V-pulley Pulley seat O-ring (To cylinder block) Fresh water pump Pump shaft speed 3860 ± 30 min-1 Delivery capacity 66.7 L/min or more Total head 4 m Aq