Yanmar — 11.3 Remote control inspection

11. Remote control (Optional) 11.3 Remote control inspection (1) When the control lever movement does not coincide with operation of the engine, check the cable end stop nut to see whether or not it is loose, and readjust/retighten when necessary. Reverse Neutral Forward Shim in Shim in Throttle Throttle Free throttle (2) Too many bends (turns) in the cable or bends at too extreme angle will make it difficult to turn the handle. Reroute the cable to reduce the number of bends and enlarge the bending radius as much as possible (to 200 mm or more). (3) Check for loose cable bracket/clamp bolts or nuts and retighten as necessary.

(4) Check cable connection screw heads, cable sleeves and other metal parts for rust or corrosion. Clean off minor rust and wax or grease the parts. Replace if the parts are heavily rusted or corroded. 181R1