13. Service standards 13.2 Engine body 13.2.1 Cylinder head (1) Cylinder head (2) Intake/exhaust valve and guide mm (3) Valve spring mm (4) Rocker arm and shaft mm 202 Inspection item Standard Limit Reference page Combustion surface distortion mm 0.05 or less 0.15 5.2.1(1) Valve sink mm Intake Exhaust 0.4-0.6 0.8 5.2.3(3) Valve seat Seat angle deg.
Intake 120 - 5.2.1(3) Exhaust 90 - Inspection item Standard Limit Reference page Intake Guide inside diameter 6.000-6.012 6.08 5.2.3 Valve stem outside diameter 5.960-5.975 5.90 Clearance 0.025-0.052 0.16 Exhaust Guide inside diameter 6.000-6.012 6.08 Valve stem outside diameter 5.945-5.960 5.90 Clearance 0.040-0.067 0.17 Valve guide projection from cylinder head 9.8-10.0 - 5.2.3(4) Valve guide driving-in method Cold-fitted - Inspection item Standard Limit Reference page Free length 37.8 36.3 5.2.4(1) Inclination - 1.3 Inspection item Standard Limit Reference page Arm shaft hole diameter 12.000-12.020 12.07 5.2.7(1) Shaft outside diameter 11.966-11.984 11.94 Clearance 0.016-0.054 0.13