2. Inspection and adjustment 2. Inspection and adjustment 2.1 Periodic maintenance schedule The engine periodic inspection timing is hard to determine as it varies with the application, load status, qualities of the fuel and lubricating oils used and handling status. General rules are described here. { : User-maintenance Е : Parts replacement z : Shop-inspection *1 For EPA requirements see also 1.5 in chapter 1. *2 Whichever comes first 15R1 System Item Before starting *2 Initial 50hrs. or one month *2 Every 50hrs. or one month *2 Every 100 hrs. or six months *2 Every 150 hrs. or one year *2 Every 250 hrs. or one year *2 Every 1000 hrs.
or 4 years Whole Visual inspection of engine outside { Fuel system Check the fuel level, and refill { Drain the fuel tank { { Drain the fuel filter { Replace the fuel filter Å Check the injection timing z Check the injection spray condition z*1 Lubricating system Check the lube oil level Crankcase { Marine gear { Replace the lube oil Crankcase Å Å Marine gear Å Å Sail drive Å Å Replace the engine lube oil filter.
Å Å Cooling system Seawater outlet { During operation Check cooling water level { Check the impeller of the cooling water pump (seawater pump) { Å Replace the fresh water coolant Every year When long life coolant of a specified type is used, replacement period of two years can be obtained. Clean & check the water passages z