2. Inspection and adjustment (2) Check the electrolyte level in the battery Fire due to electric short-circuit Make sure to turn off the battery switch or disconnect the negative cable (-) before inspecting the electrical system. Failure to do so could cause short-circuiting and fires. Always disconnect the (-) Negative battery cable first before disconnecting the battery cables from battery. An accidental "Short circuit" may cause damage, fire and or personal injury. And remember to connect the (-) Negative battery cable (back onto the battery) LAST. Proper ventilation of the battery area Keep the area around the battery well ventilated, paying attention to keep away any fire source.
During operation or charging, hydrogen gas is generated from the battery and can be easily ignited. Do not come in contact with battery electrolyte Pay sufficient attention to avoid your eyes or skin from being in contact with the fluid. The battery electrolyte is dilute sulfuric acid and causes burns. Wash it off immediately with a large amount of fresh water if you get any on you. Battery structure Terminal Cap Cover Cathode plate Separator Battery case Glass mat Anode plate 27