Yanmar — 3.4 Troubleshooting by measuring compression pressure

3. Troubleshooting (3) Engine speed and compression pressure (for reference) Compression pressure (kgf/cm 2 ) 40 3.92 35 3.43 30 2.94 25 2.45 20 1.96 (MPa) 200 250 300 350 400 Engine speed (min -1 ) (4) Measured value and troubleshooting When the measured compression pressure is below the limit value, inspect each part by referring to the table below. 63R1 3YM30 3YM20/2 YM15 3YM20/2 YM15 No. Item Cause Corrective action 1 • Air cleaner element • Clogged element • Broken element • Defect at element seal portion • Clean the element. • Replace the element. 2 • Valve clearance • Excessive or no clearance • Adjust the valve clearance.

(See 2.2.2(5) in Chapter 2.) 3 • Valve timing • Incorrect valve clearance • Adjust the valve clearance. (See in Chapter2.) 4 • Cylinder head gasket • Gas leak from gasket • Replace the gasket. • Retighten the cylinder head bolts to the specified torque. (See 5.2.5 in Chapter 5.) 5 • Intake / exhaust vale • Valve seat • Gas leak due to worn valve seat or foreign matter trapping • Sticking valve • Lap the valve seat. (See 5.2.2 in Chapter 5.) • Replace the intake/exhaust valve. 6 • Piston • Piston ring • Cylinder • Gas leak due to scratching or wear • Perform honing and use an oversized part.