4. Disassembly and reassembly [NOTE: ] If a lube oil supply/discharge pump is used for the engine, the intake hose is placed in the dipstick guide, and for the clutch side (gearbox) it is placed in the oil hole on top of the case. (Refer to 2.2.2(2) & (3) ) (3) Removing (electrical) wiring Remove the wiring from the engine. (Refer to 2.2.4(9) ) (4) Removing the fuel filter & fuel pipe 1) Remove the fuel pipes (fuel filter-fuel feed pump, fuel filter-fuel injection pump and fuel nozzle-fuel pump) 2) Remove the fuel filter. Cylinder head To fuel tank Fuel pipe Bracket Fuel filter Fuel injection pump Clamp Fuel pipe 78