Use only tools suited to the task. Using damaged, low quality, faulty, or makeshift tools could cause personal injury. Periodic Replacement Of Critical Parts Periodically replace parts used to insure safety or prevent accident. (See Periodic Replacement Of Component Parts For Safety Devices, Section 40.) Replace these components periodically with new ones, regardless of whether or not they appear to be defective. These components deteriorate over time. Replace or repair any such components if any defect is found, even though they have not reached the time specified.
Stopping The Engine Before Service When carrying out inspection or maintenance, always stop the machine on firm flat ground, lower the dump body, then stop the engine. If the engine must be run during service, such as when cleaning the radiator, always move the shift control lever to the NEUTRAL (N) position and set the parking brake lever to the PARKING position. Always carry out the work with two people. One person should sit on the operator's seat to stop the engine if necessary. NEVER move any controls not needed to operate. Put blocks under the wheels. When servicing the machine, be careful not to touch any moving part or get clothing caught.
When carrying out service with the dump body raised, always place the dump lever at the HOLD position, and apply the lock (if equipped). Install the body-up safety pins (or cable) securely. Safety - Section 20 Page 20-11 PRECAUTIONS FOR MAINTENANCE NG OUT MAINTENANCE engine or operate the controls while you are performing service or lubrication, you could y or death. th a va e WARNING TAG to the control lever in the operator's cab to alert others that you are chine. Attach additional warning tags around the machine, if necessary. ilable from your Komatsu distributor. (Part No. 09963-03000)