ety Safety - Section 20 Page 20-13 Rules To Follow When Adding Fu • Spilled fuel and oil may cause s • Always tighten the cap of the fu • Never use fuel for washing any • Always add fuel and oil in a we Radiator Water Level • If it is necessary to add water t engine and radiator to cool dow • Slowly loosen the cap to relieve Use Of Lighting When checking fuel, oil, coolant, o with anti-explosion specifications. there is danger or explosion. Precautions With Battery • When repairing the electrical welding, remove the negative ( of current. Handling High-Pressure Hoses • Do not bend high-pressure hos hoses.
They may burst during u • Always repair any loose or brok llow uel an ighte se fue add fu When Adding Fu d oil may cause s n the cap of the fu l for washing any el and oil in a we evel ary to add water t diator to cool dow the cap to relieve uel, oil, coolant, o n specifications. explosion. el Or Oil lipping. Always clean up spills immediately. el and oil fillers securely. parts. ll-ventilated place. o the radiator, stop the engine and allow the n before adding the water. pressure before removing the cap.
r battery electrolyte, always use lighting If such lighting equipment is not used, system or when carrying out electrical -) terminal of the battery to stop the flow es or hit them with hard objects. Do not use any bent or cracked piping, tubes or se. en fuel hoses or oil hoses. If fuel or oil leaks, it may cause a fire.