Komatsu — 14. Shift Limiter Pilot Lamp

OM3210 Operation - Section 32 Operator Cab and Controls Page 32-21 5. Torque Converter Oil Temperature Monitor 9. High Beam Pilot Lamp The high beam pilot lamp (9) lights up when the head lamps are on high beam. The torque converter oil temper- ature monitor (5, Figure 32-6) is a lamp which indicates a rise in the torque converter oil tempera- ture. When the monitor lamp flashes, stop the machine and run the engine with no load at 1200-1500 RPM until the green range of the temperature gauge lights. Action code “05” will be indicated. 10. Left Turn Signal Pilot Lamp When the turn signal lever is moved downwards, the left turn signal pilot lamp (10) flashes. 6.

Torque Converter Oil Temperature Gauge The torque converter oil temperature gauge (6) indi- cates the temperature of the torque converter oil. If the temperature is normal dur- ing operation, the green range will light. If the red range lights during opera- tion, the alarm buzzer will sound, the central warning lamp will light up and the torque converter oil temper- ature monitor lamp will flash at the same time. If this occurs, stop the machine and run the engine with no load at 1200-1500 RPM until the green range lights. 11. Right Turn Signal Pilot Lamp When the turn signal lever is moved upwards, the right turn signal pilot lamp (11) flashes. 12. Speedometer 7.

Retarder Oil Temperature Monitor The digital speedometer (12) indicates the travel speed of the truck in miles per hour. This figure will appear momentarily when the keyswitch is first turned On to demonstrate that all segments are working. The retarder oil temperature monitor (7) is a lamp which warns that the retarder oil tem- perature has risen. If it flashes, stop the machine, return the transmission range selector lever to NEUTRAL, and run the engine under no load at 1200-1500 RPM until the warning lamp goes out. Action code “05” will be indicated. 13. Tachometer The tachometer (13) indi- cates the engine speed in Revolutions Per Minute (RPM). 8.

Retarder Oil Temperature Gauge The retarder oil temperature gauge (8) indicates the tem- perature of the retarder cooling oil. During normal operation, a lamp in the green range should light up. 14. Shift Limiter Pilot Lamp If the lamp in the red range lights up during opera- tion, the alarm buzzer will sound, the central warning lamp will flash, and the retarder oil temperature mon- itor lamp will flash at the same time. If this happens, stop the machine, return the transmission range selector lever to NEUTRAL, and run the engine at 1200-1500 RPM under no load, and wait until the lamps in the green range light up.

The shift limiter pilot lamp (14) lights up whenever the shift lim- iter switch in the center console is activated.