20-10-4 ENGINE HG 130-3 Model QSB5.9-C150 Type Vertical, in-line, water-cooled, 4 strokes Aspiration turbocharged aftercooling No.
of cylinders 6 Bore 102 mm Stroke 120 mm Piston displacement 5.9 L Horsepower - Gross 97kW/2,200rpm Maximum torque 560Nm/1,500rpm Torque rise 32% Air cleaner Dry type Electrical 28V，70A Battery 12V*2；900cca TRANSMISSION AND TORQUE CONVERTER HG13 0-3 Speed (at rated engine speed) Forward / Reverse (km/h) 1st 5.7/5.7 2nd 8.9/14.3 3rd 14.3/31.4 4th 21.6 5th 31.4 6th 44.3 TANDEM DRIVE HG130 -3 Oscillating welded box section 614*225 mm Side wall thickness Inner 22 mm Outer 22 mm Whell axle spacing 1,535.4 mm Tandem oscillation ±13 ° FRONT AXLE HG130- 3 Type Solid bar construction welded steel sections Ground clearance at pivot 610 mm Wheel lean angle, right or left ±17 ° Oscillation, total 32 ° REAR AXLE HG130-3 Alloy steel, heat treated, full floating axle with lock/unlock differential NO-SPIN differential STEERING HG130- 3 Hydraulic power steering providing stopped engine steering meeting ISO 5010 Hydraulic power steering Minimum turning radius 6.6 mm Maximum steering range, right or left 49 ° Articulation ±26 °