ENGINE - Engine and Mounting Section 110-0030 55 56 57 SM - 1962 51 52 53 54 58 59 50 39 21 29 26 9 60 61 62 21 39 16 17 18 1 B B 19 26 25 38 4 20 15 22,23 A 5 8 7 10 11 44 31 47 48 POSITION A 13 A 12 3 36 11 24 2 45 46 11 POSITION B 12 37 S.W.E.
41 49 32 42 43 11 24 2 35 SECURITY KIT ENGINE DIPSTICK SECURITY KIT ENGINE OIL FILL 40 41 6 3427 28 66 65 33 27 28 30 14 65 64 63 1 - Engine 2 - Locknut 3 - Bolt 4 - Alternator Guard 5 - Rear Mount 6 - Front Mount 7 - Bolt 8 - Lockwasher 9 - Support Bracket 10 - Bolt 11 - Snubbing Washer 12 - Isolation Mount 13 - Bolt 14 - Locknut 15 - Plate Support 16 - Damper 17 - Lockwasher 18 - Bolt 19 - Flange Coupling 20 - Bolt 21 - Clamp 22 - Bolt 23 - Lockwasher 24 - Washer 25 - Bolt 26 - Washer 27 - Padlock 28 - Key 29 - Bolt 30 - P-Clip 31 - P-Clip 32 - Bracket 33 - Latch Assembly 34 - Latch Assembly 35 - Bolt 36 - Oil Filter 37 - Fuel Filter 38 - Coolant Filter 39 - Breather Line 40 - Filler Hose 41 - Clamp 42 - Lockwasher 43 - Locknut 44 - Plate 45 - P-Clip 46 - Bolt 47 - Lockwasher 48 - Locknut 49 - Filler Assembly 50 - Alternator 51 - Bolt 52 - Lockwasher 53 - Eye Bolt 54 - Jam Nut 55 - Link 56 - Nut 57 - Eye Bolt 58 - Lockwasher 59 - Bolt 60 - Locknut 61 - Lockwasher 62 - Bolt 63 - Bracket 64 - Bolt 65 - Washer 66 - Locknut Fig.
1 - Engine and Mounting DESCRIPTION Numbers in parentheses refer to Fig. 1. through engine mounts provide sufficient flexibility to absorb varying engine vibration and torsional loads. For engine make, model and specification, refer to Section 000-0000, GENERAL INFORMATION. For engine servicing and repair data refer to the engine manufacturers service manual. There are two full-flow oil filters (36) mounted on the left hand side of engine (1) in a downward position. The filters are of the throw away, spin-on type. Oil supplied by the engine oil pump passes through oil filters (36) before reaching the various moving parts of engine (1).
The oil is forced by pump pressure through a passage in the filter adaptor and into the elements. Impurities are filtered out as the oil passes through the The engine is mounted to the frame at three points by a mounting bracket (6) at the front of engine (1) and two rear mounts (5). Rubber isolation mounts (12) SM 1571 12-98 1